CEL-FI GO 2 Mobile Repeater for Optus – Mobile & Vehicle Kit

Key Features

• Complete package with a spring base bulbar antenna, cabling, repeater & small stick on T bar antenna for the signal disbursement
• Full service for up to 20 Optus mobile phones or modems
• Supported Frequencies – 3G 900 or 2100MHz / 4G 1800 or 2100 or 2600MHz (manual selection)
• Suitable for Optus, Amaysim, Dodo, iiNet, plus more
• Currently Australia’s only legal mobile phone repeater system.

Usage

• The CEL-FI GO 2 Repeater for the Optus network is a convenient way to boost and distribute a 3G/4G mobile signal within your vehicle including cars, 4WD & trucks
• Installing this device in your vehicle can improve the reliability of phone calls, text messages, and increase 3G & 4G services
• This is a complete repeater system designed to provide coverage within and around the Vehicle.
• The wideband spring-based whip antenna is ideal for travelling around the country as it offers 6.5dBi gain across the low band 3G and 4G frequencies
• The bulbar antenna is connected to the repeater via a 4.5m RG58 tail with an adapted fitting to connect directly onto the CEL-FI GO’s input connector. A Small Stick On T-Bar Antenna is then connected to the CEL-FI GO’s output in order to disburse the captured signal
• The repeater provides enough boost to create a small radius of coverage around the vehicle.
• It’s important to note that this repeater unit is designed to provide 3G & 4G services to mobile devices, it can produce both networks concurrently.

Why is it legal?

• Many mobile service providers do not support personal repeaters on their network. This is due to the interference they can cause when connected to the network, or when they are setup incorrectly
• The CEL-FI GO system is the only personal repeater that is widely approved by carriers in Australia
• The CEL-FI GO is different to a standard repeater – it is designed to provide maximum coverage, be network friendly, and is easily installed by the end user. It does by:
  • continuously monitoring power levels of the cell tower it is connected to, and constantly adjusting its output power to suit
  • only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band
  • giving the service provider the ability to shut down the repeater remotely if needed, using a signal from the base station
  • not interfering with the carrier’s network or other users on the network
  • having a unique installation process to eliminate feedback into the mobile network.

Dual Service Booster!

• Optus’s CEL-FI GO 2 will not boost the 4G+ regional network.