CEL-FI GO 2 Mobile Repeater for Vodafone/TPG – Mobile & Vehicle Kit

Key Features

• Complete package with a spring base bulbar antenna, cabling, repeater & small stick on T bar antenna for the signal disbursement
• Full service for up to 20 Vodafone mobile phones or modems
• Supported Frequencies – 3G 900 or 2100MHz / 4G 1800 or 2100 or 2600MHz (manual selection)
• Suitable for Vodafone, TPG, GoTalk, Redbull Mobile, plus more
• Currently Australia’s only legal mobile phone repeater system.

Usage

• The CEL-FI GO 2 Repeater for the Vodafone network is a convenient way to boost and distribute a 3G/4G mobile signal within your vehicle including cars, 4WD & trucks
• Installing this device in your vehicle can improve the reliability of phone calls, text messages, and increase 3G & 4G services
• This is a complete repeater system designed to provide coverage within and around the Vehicle.
• The wideband spring-based whip antenna is ideal for travelling around the country as it offers 6.5dBi gain across the low band 3G and 4G frequencies
• The bulbar antenna is connected to the repeater via a 4.5m RG58 tail with an adapted fitting to connect directly onto the CEL-FI GO’s input connector. A Small Stick On T-Bar Antenna is then connected to the CEL-FI GO’s output in order to disburse the captured signal
• The repeater provides enough boost to create a 10-20m radius of coverage around the vehicle.

Professional installation recommended for vehicles

• It is possible to self-install the CEL-FI GO inside your vehicle, however, you must ensure the internal and external antennas are isolated
• To achieve the appropriate levels of isolation, it’s generally recommended that the external antenna is mounted on your vehicle tray, 4WD lightbar/roofracks, rather than bullbar (i.e. isolated by the metal roof)
• If installing on a bullbar, it’s important that the internal antenna is placed in a position that will have the most metal between the external antenna
• The CEL-FI GO can cause interference to your vehicle electronic systems, so we strongly recommend professional installation to make sure you get the best from this product.

Why is it legal?

• Many mobile service providers do not support personal repeaters on their network because of the interference they can cause when connected to the network, or when they are setup incorrectly
• The CEL-FI GO system is the only personal repeater that is widely approved by carriers in Australia
• The CEL-FI GO is different to a standard repeater, as it’s designed for maximum coverage, is network friendly, and is easily installed by the end user. It does this by:
  • continuously monitoring the power levels of the cell tower it’s connected to, constantly adjusting its output power to suit the levels
  • only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band
  • giving the service provider the ability to shut down the repeater remotely if needed, using a signal from the base station
  • not interfering with the carrier’s network or other users on the network
  • having a unique installation process to eliminate feedback into the mobile network.

Dual Service Booster!

• The CEL-FI GO 2 for Vodafone will not boost the Vodafone regional network – you can tell you’re using the Regional Network when ‘Vodafone AU R’ or ‘Voda R’ appears on your phone.